Setting The Interval For Receiving Lsas - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l
----End

6.8.3 Setting the Interval for Receiving LSAs

Setting the interval for receiving LSAs prevents unnecessary LSA updates.
Context
When a network is unstable, control the minimum interval for receiving the same LSA update.
To prevent unnecessary LSA updates caused by network changes, by default, set the interval for
receiving the same LSA update to 1000 ms.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 [ process-id ]
The OSPFv3 view is displayed.
Step 3 Run:
lsa-arrival-interval arrival-interval
The interval for receiving LSAs is set.
----End
6.8.4 Configuring an Intelligent Timer for Generating LSAs
Configuring an intelligent timer for generating LSAs speeds up network convergence.
Issue 02 (2014-09-30)
spf timers delay-interval hold-interval
An SPF normal timer is configured.
Configure an SPF intelligent timer.
1. Run:
system-view
The system view is displayed.
2. Run:
ospfv3 [ process-id ]
The OSPFv3 view is displayed.
3. Run:
spf-schedule-interval { delay-interval hold-interval | intelligent-timer
max-interval start-interval hold-interval-1 }
An SPF intelligent timer is configured.
NOTE
An SPF normal timer and an SPF intelligent timer are mutually exclusive.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
436