Configuring Basic Ospfv3 Functions - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing

6.2 Configuring Basic OSPFv3 Functions

Before building OSPFv3 networks, you need to configure basic OSPFv3 functions.
6.2.1 Before You Start
You need to enable OSPFv3 and specify interfaces and area IDs before configuring other
functions.
Applicable Environment
Enable the OSPFv3 process and specify its router ID before configuring OSPFv3; otherwise,
other functions cannot take effect.
You must enable OSPFv3 and specify the interface and area ID before configuring other
functions. OSPFv3 configurations, however, are independent of interface-related features.
Pre-configuration Tasks
Before configuring basic OSPFv3 functions, complete the following tasks:
l
l
Data Preparation
To configure basic OSPFv3 functions, you need the following data.
No.
1
2
3
6.2.2 Enabling OSPFv3
Creating an OSPFv3 process is a prerequisite for configuring all OSPFv3 features. By creating
an OSPFv3 process, you can manually specify the router ID for a router.
Context
OSPFv3 supports multiple processes. Multiple OSPFv3 processes running on one router are
differentiated by process IDs. OSPFv3 process ID is set when OSPFv3 is enabled and is only
locally valid. It does not affect the packet exchange with other routers.
Issue 02 (2014-09-30)
– If a router restarts because of abnormalities, you can enable OSPFv3 Graceful Restart
(GR) to avoid service interruption during the restart of the router.
Making the network layers of the adjacent nodes accessible
Enabling IPv6 capabilities
Data
Router ID
OSPFv3 process ID
Interfaces on which OSPFv3 needs to be enabled and their areas
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
407