Configuring Dead Time Of Neighbor Relationship - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
ospfv3 timer hello interval [ instance instance-id ]
The interval for sending Hello packets is set on the interface.
----End

6.3.3 Configuring Dead Time of Neighbor Relationship

If a router does not receive a Hello packet from its neighbor within the Holddown time, the router
considers the neighbor relationship invalid.
Context
If a router does not receive any Hello packet from its neighbor during a specified period, the
neighbor router is considered invalid. The specified period is called the dead time of the neighbor
relationship. The dead time must be at least four times the Hello interval on an interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
ospfv3 timer dead interval [ instance instance-id ]
The dead time of the neighbor relationship is specified.
----End
6.3.4 Configuring the Interval for Retransmitting LSAs to
Neighboring Routers
After a router sends an LSA to its neighbor, the router expects to receive an LSAck packet from
its neighbor. If the router does not receive an LSAck packet within the LSA retransmission
interval, it retransmits the LSA to the neighbor.
Issue 02 (2014-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
412