Huawei Quidway NetEngine80E Configuration Manual page 764

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Configuration
Objective
To control the
advertising and
receiving of BGP
routes.
To use network
resources efficiently
and reduce network
congestion.
To simplify the
configuration and
management of a
large-scale BGP
network.
To suppress route
flapping and improve
route transmission
efficiency.
Issue 02 (2014-09-30)
Configuration Procedure
l
8.4 Configuring BGP Route
Attributes
l 8.5 Configuring BGP to
Advertise Routes
l 8.6 Configuring BGP to
Receive Routes
l 8.16 Configuring a BGP
Device to Send a Default
Route to Its Peer
l 8.17 Configuring BGP
Load Balancing
l 8.9 Configuring BGP Peer
Groups
l 8.10 Configuring BGP
Route Reflectors
l 8.11 Configuring a BGP
Confederation
l 8.12 Configuring BGP
Community Attributes
l 8.15 Configuring BGP
Route Dampening
l 8.8 Configuring BGP Route
Aggregation
l 8.13 Configuring Prefix-
based BGP ORF
l 8.18 Configuring Path
MTU Auto Discovery
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 BGP Configuration
Note
These configurations are
optional.
Before the configuration,
familiarize yourself with the
following:
l Route Attributes
l Principles of Route
Selection
l Principles for BGP Route
Advertisement
The configuration is optional.
Before the configuration,
familiarize yourself with the
following:
l Routing Selection
Principles for Load
Balancing
These configurations are
optional.
Before the configuration,
familiarize yourself with the
following:
l Configuring and Managing
a Large-Scale BGP
Network
These configurations are
optional.
Before the configuration,
familiarize yourself with the
following:
l Suppressing Route
Flapping and Improving
the Efficiency of Route
Transmission
739