Huawei Quidway NetEngine80E Configuration Manual page 398
Universal service router, ip routing
Hide thumbs
Also See for Quidway NetEngine80E:
- Configuration manual - reliability (1432 pages) ,
- Configuration manual (341 pages) ,
- Installation manual (169 pages)
Advertisement
HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
The preceding command output shows information about the multicast routing table on
Router C.
Step 4 Configure an MPLS RSVP-TE tunnel.
# Configure Router B.
[RouterB] mpls lsr-id 2.2.2.2
[RouterB] mpls
[RouterB-mpls] mpls te
[RouterB-mpls] mpls rsvp-te
[RouterB-mpls] mpls te cspf
[RouterB-mpls] quit
[RouterB] interface Gigabitethernet 2/0/0
[RouterB-GigabitEthernet2/0/0] mpls
[RouterB-GigabitEthernet2/0/0] mpls te
[RouterB-GigabitEthernet2/0/0] mpls rsvp-te
[RouterB-GigabitEthernet2/0/0] quit
[RouterB] ospf 1
[RouterB-ospf-1] enable traffic-adjustment
[RouterB-ospf-1] opaque-capability enable
[RouterB-ospf-1] area 0.0.0.0
[RouterB-ospf-1-area-0.0.0.0] mpls-te enable
[RouterB-ospf-1-area-0.0.0.0] quit
# Configure Router C.
[RouterC] mpls lsr-id 3.3.3.3
[RouterC] mpls
[RouterC-mpls] mpls te
[RouterC-mpls] mpls rsvp-te
[RouterC-mpls] quit
[RouterC] interface Gigabitethernet 1/0/0
[RouterC-GigabitEthernet1/0/0] mpls
[RouterC-GigabitEthernet1/0/0] mpls te
[RouterC-GigabitEthernet1/0/0] mpls rsvp-te
[RouterC-GigabitEthernet1/0/0] quit
[RouterC] interface Gigabitethernet 2/0/0
[RouterC-GigabitEthernet2/0/0] mpls
[RouterC-GigabitEthernet2/0/0] mpls te
[RouterC-GigabitEthernet2/0/0] mpls rsvp-te
[RouterC-GigabitEthernet2/0/0] quit
[RouterC] ospf 1
[RouterC-ospf-1] opaque-capability enable
[RouterC-ospf-1] area 0.0.0.0
[RouterC-ospf-1-area-0.0.0.0] mpls-te enable
[RouterC-ospf-1-area-0.0.0.0] quit
# Configure Router D.
[RouterD] mpls lsr-id 4.4.4.4
[RouterD] mpls
[RouterD-mpls] mpls te
[RouterD-mpls] mpls rsvp-te
[RouterD-mpls] quit
[RouterD] interface Gigabitethernet 1/0/0
[RouterD-GigabitEthernet1/0/0] mpls
[RouterD-GigabitEthernet1/0/0] mpls te
[RouterD-GigabitEthernet1/0/0] mpls rsvp-te
[RouterD-GigabitEthernet1/0/0] quit
[RouterD] ospf 1
[RouterD-ospf-1] opaque-capability enable
[RouterD-ospf-1] area 0.0.0.0
Issue 02 (2014-09-30)
Upstream Interface: GigabitEthernet2/0/0
List of 1 downstream interface
1:
GigabitEthernet1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 OSPF Configuration
373
Hide quick links:
Advertisement
