Huawei Quidway NetEngine80E Configuration Manual page 513

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
3.
4.
Data Preparation
To complete the configuration, you need the following data:
Device
Name
RouterA
RouterB
Procedure
Step 1 Configure OSPFv3 on RouterA and RouterB.
# Configure RouterA.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] ospfv3 1
[RouterA-ospfv3-1] router-id 1.1.1.1
[RouterA-ospfv3-1] area 1
[RouterA-ospfv3-1-area-0.0.0.1] quit
[RouterA-ospfv3-1] quit
# Configure RouterB.
<HUAWEI> system-view
[HUAWEI] sysname RouterB
[RouterB] ospfv3 1
[RouterB-ospfv3-1] router-id 2.2.2.2
[RouterB-ospfv3-1] area 1
[RouterB-ospfv3-1-area-0.0.0.1] quit
[RouterB-ospfv3-1] quit
Step 2 Configure IPv6 addresses and enable OSPFv3 on interfaces.
# Configure RouterA.
[RouterA] interface gigabitethernet1/0/1
[RouterA-GigabitEthernet1/0/1] ipv6 enable
[RouterA-GigabitEthernet1/0/1] ipv6 address 2001:DB8:100::1 64
[RouterA-GigabitEthernet1/0/1] ospfv3 1 area 1
[RouterA-GigabitEthernet1/0/1] quit
# Configure RouterB.
[RouterB] interface gigabitethernet1/0/1
[RouterB-GigabitEthernet1/0/1] ipv6 enable
Issue 02 (2014-09-30)
Configure an SA and apply a proposal to SA, define inbound and outbound parameters
which include SPI and keys.
Apply the SA to the OSPFv3 process to protect OSPFv3 packets between RouterA and
RouterB.
Router
ID
1.1.1.1
2.2.2.2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Proc IPv6 Address
ess
ID
1 GE1/0/1:
2001:DB8:100::
1/64
1 GE1/0/1:
2001:DB8:100::
2/64
6 OSPFv3 Configuration
SPI Authentication Key
in the String Format
12345 Huawei-123
12345 Huawei-123
488