Configuring The Network Management Function Of Ospfv3 - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
6.14 Configuring the Network Management Function of
OSPFv3
OSPFv3 supports the network management function. You can bind the OSPFv3 MIB to a certain
OSPFv3 process.
6.14.1 Before You Start
Before configuring the network management function for OSPFv3, familiarize yourself with the
usage scenario, complete pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
OSPFv3 supports the network management function. You can bind OSPFv3 MIB and a certain
OSPFv3 process. In addition, OSPFv3 also supports the trap function and the log function.
Pre-configuration Tasks
Before configuring the network management function of OSPFv3, complete the following tasks:
l
l
Data Preparation
None.
6.14.2 Configuring OSPFv3 MIB Binding
The MIB is a virtual database of the device status maintained by the managed devices.
Context
When multiple OSPFv3 processes are enabled, you can configure OSPFv3 MIB to select the
process to be processed, that is, that is, configure OSPFv3 MIB to select the process to which it
is bound.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 mib-binding process-id
OSPFv3 MIB binding is configured.
----End
Issue 02 (2014-09-30)
Configuring IP addresses for interfaces to make neighboring nodes reachable
Configuring Basic OSPFv3 Functions
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
463