Huawei Quidway NetEngine80E Configuration Manual page 212

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l
l
l
Issue 02 (2014-09-30)
At Router C, if we configure rip version 2 broadcast, then the send version on that interface
is version 2 broadcast with authentication. Authentication on other devices was already
configured, so they will be able to receive version 2 broadcast updates from Router C.
Router B will send version 1 updates (no authentication). Router A and Router C can receive
these updates.
Step8: Configure rip version 2 broadcast at Router B
interface2 on Router B: (version 2 brooadcast)
Send: Version 2 broadcast with authentication
Receive: Version 1
Version 2 broadcast and multicast with authentication
interface1 on Router A: (version 2 brooadcast)
Send: Version 2 broadcast with authentication
Receive: Version 1
Version 2 broadcast and multicast with authentication
interface3 on Router C: (version 2 brooadcast)
Send: Version 2 broadcast with authentication
Receive: Version 1
Version 2 broadcast and multicast with authentication
At Router B, if we configure rip version 2 broadcast, then the send version on that interface
is version 2 broadcast with authentication. Authentication on other devices was already
configured, so they will be able to receive version 2 broadcast update from Router B. Other
devices also will send version 2 broadcast with authentication, so each device can receive
packets from other devices.
Step9: Configure rip version 2 at Router A
interface2 on Router B: (version 2 brooadcast)
Send: Version 2 broadcast with authentication
Receive: Version 1
Version 2 broadcast and multicast with authentication
interface1 on Router A: (version 2)
Send: Version 2 multicast with authentication
Receive: Version 2 broadcast and multicast with authentication
interface3 on Router C: (version 2 brooadcast)
Send: Version 2 broadcast with authentication
Receive: Version 1
Version 2 broadcast and multicast with authentication
At Router A, if we configure rip version 2, then the send version on that interface is version
2 multicast with authentication. Authentication on other devices are already configured, so
they will be able to receive version 2 multicast updates from Router A. Other devices also
will send version 2 broadcast packets with authentication, so each device can receive
packets from other devices.
Step10: Configure rip version 2 at Router C
interface2 on Router B: (version 2 brooadcast)
Send: Version 2 broadcast with authentication
Receive: Version 1
Version 2 broadcast and multicast with authentication
interface1 on Router A: (version 2)
Send: Version 2 multicast with authentication
Receive: Version 2 broadcast and multicast with authentication
interface3 on Router C: (version 2)
Send: Version 2 multicast with authentication
Receive: Version 2 broadcast and multicast with authentication
At Router C, if we configure rip version 2, then the send version on that interface is version
2 multicast with authentication. Authentication on other devices was already configured,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RIP Configuration
187