Huawei Quidway NetEngine80E Configuration Manual page 233

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Route Flags: R - RIP, T - TRIP
-------------------------------------------------------------------------
Peer 192.168.1.2
The preceding display shows that the routes advertised by RIP-1 carry natural masks.
Step 3 Configure the RIP version number.
# Configure RIP-2 on Router A.
[RouterA] rip
[RouterA-rip-1] version 2
[RouterA-rip-1] quit
# Configure RIP-2 on Router B.
[RouterB] rip
[RouterB-rip-1] version 2
[RouterB-rip-1] quit
# Configure RIP-2 on Router C.
[RouterC] rip
[RouterC-rip-1] version 2
[RouterC-rip-1] quit
# Configure RIP-2 on Router D.
[RouterD] rip
[RouterD-rip-1] version 2
[RouterD-rip-1] quit
Step 4 Verify the configuration.
# Check the RIP routing table of Router A.
[RouterA] display rip 1 route
Route Flags: R - RIP
-------------------------------------------------------------------------
Peer 192.168.1.2
The preceding display shows that the routes advertised by RIPv2 carry subnet masks.
----End
Configuration Files
l
Issue 02 (2014-09-30)
A - Aging, G - Garbage-collect
on Pos1/0/0
Destination/Mask
172.16.0.0/16
10.0.0.0/8
A - Aging, G - Garbage-collect
on Pos1/0/0
Destination/Mask
172.16.1.0/24
10.1.1.0/24
Configuration file of Router A
#
sysname RouterA
#
interface Pos1/0/0
link-protocol ppp
undo shutdown
ip address 192.168.1.1 255.255.255.0
#
rip 1
version 2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Nexthop Cost Tag
192.168.1.2 1
192.168.1.2 1
Nexthop Cost Tag
192.168.1.2 1
192.168.1.2 1
3 RIP Configuration
Flags Sec
0 RA 16
0 RA 16
Flags Sec
0 RA 32
0 RA 32
208