Huawei Quidway NetEngine80E Configuration Manual page 693

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Step 5 Configure BGP to import IS-IS routes.
[RouterC] bgp 65009
[RouterC-bgp] import-route isis 1
[RouterC-bgp] quit
# Run the display ip routing-table command to display the routing table of Router C. The
command output shows that BGP has imported the IS-IS route 10.1.1.0/24.
[RouterC] display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destination/Mask
----End
Configuration Files
l
l
Issue 02 (2014-09-30)
Destinations : 7
Proto
10.1.1.0/24 EBGP 255 0 D 10.2.1.1 Pos1/0/0
10.2.1.0/24 Direct 0
10.2.1.1/32 Direct 0
10.2.1.2/32 Direct 0
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
3.3.3.3/32 Static 60
Configuration file of Router A
#
sysname RouterA
#
isis 1
network-entity 10.0000.0000.0001.00
#
interface Pos1/0/0
link-protocol ppp
ip address 10.1.1.1 255.255.255.0
isis enable 1
#
return
Configuration file of Router B
#
sysname RouterB
#
isis 1
network-entity 10.0000.0000.0002.00
import-route bgp route-policy RTC
#
interface Pos1/0/0
link-protocol ppp
ip address 10.1.1.2 255.255.255.0
isis enable 1
#
interface Pos2/0/0
link-protocol ppp
ip address 10.2.1.1 255.255.255.0
#
interface LoopBack0
ip address 1.1.1.1 255.255.255.255
#
bgp 65008
router-id 1.1.1.1
peer 10.2.1.2 as-number 65009
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Routes : 7
Pre Cost Flags NextHop
0 D 10.2.1.2
0 D 10.2.1.1
0 D 127.0.0.1
0 D 127.0.0.1
0 D 127.0.0.1
0 D 0.0.0.0
7 IS-IS Configuration
Interface
Pos1/0/0
Pos1/0/0
InLoopBack0
InLoopBack0
InLoopBack0
NULL0
668