Huawei Quidway NetEngine80E Configuration Manual page 695

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Figure 7-10 Networking diagram of IS-IS MT
2001:db8:1::1/64
2001:db8:1::2/64
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure IP addresses for the interfaces.
Issue 02 (2014-09-30)
GE1/0/0
RouterA
192.168.1.1/24
IPv4/IPv6
cost=4
GE2/0/0
cost=6
GE1/0/0
2001:db8:2::1/64
IPv4/IPv6
cost=14
RouterD
Configure IPv4/IPv6 addresses for the interfaces on routers so that devices in different areas
can communicate.
Enable IPv6 as well as global IPv4 and IPv6 topologies on the routers supporting the IPv4/
IPv6 dual stack and enable a global IPv4 topology on Router B.
Configure basic IS-IS functions and link costs.
Create separate IPv4 and IPv6 topology instances on the routers supporting the IPv4/IPv6
dual stack and create an IPv4 topology instance on router B.
Associate the interfaces with specified topology instances.
IP addresses of the interfaces on routers as shown in
of Router A (0000.0000.0001), system ID of Router B (0000.0000.0002), system ID of
Router C (0000.0000.0003), system ID of Router D (0000.0000.0004), and level of all the
routers (Level-1).
Cost of the link from Router D to Router A (6), cost of the link from Router A to Router
B (4), cost of the link from Router B to Router C (3), cost of the link from Router D to
Router C (14), default cost of Loopback 1 on Router D (0), and default costs of other links
(10).
IPv4 topology instance blue for all routers and IPv6 topology instance red for Router A,
Router C, and Router D.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
RouterB
GE1/0/0
192.168.1.2/24
Loopback1
2001:db8:3::1/64
GE2/0/0
GE1/0/0
2001:db8:2::2/64
7 IS-IS Configuration
IPv4
GE2/0/0
192.168.2.1/24
cost=3
GE2/0/0
192.168.2.2/24
IPv4/IPv6
RouterC
Figure 7-10, area ID (86), system ID
670