Download Print this page

Huawei Quidway NetEngine80E Configuration Manual page 497

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
[RouterB] ipv6
[RouterB] ospfv3
[RouterB-ospfv3-1] router-id 2.2.2.2
[RouterB-ospfv3-1] quit
[RouterB] interface GigabitEthernet 1/0/0
[RouterB-GigabitEthernet1/0/0] ospfv3 1 area 0
[RouterB-GigabitEthernet1/0/0] quit
# Configure Router C, enable OSPFv3, and set its Router ID to 3.3.3.3.
[RouterC] ipv6
[RouterC] ospfv3
[RouterC-ospfv3-1] router-id 3.3.3.3
[RouterC-ospfv3-1] quit
[RouterC] interface GigabitEthernet 1/0/0
[RouterC-GigabitEthernet1/0/0] ospfv3 1 area 0
[RouterC-GigabitEthernet1/0/0] quit
# Configure Router D, enable OSPFv3, and set its Router ID to 4.4.4.4.
[RouterD] ipv6
[RouterD] ospfv3
[RouterD-ospfv3-1] router-id 4.4.4.4
[RouterD-ospfv3-1] quit
[RouterD] interface GigabitEthernet 1/0/0
[RouterD-GigabitEthernet1/0/0] ospfv3 1 area 0
[RouterD-GigabitEthernet1/0/0] quit
# Display the neighbors of Router A. You can view the DR priority (its default value is 1) and
the neighbor status. Router D is the DR and Router C is the BDR.
[RouterA] display ospfv3 peer
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.0)
Neighbor ID
2.2.2.2
3.3.3.3
4.4.4.4
# Display the neighbors of Router D, and you can view that all neighbors of Router D are in the
Full state.
[RouterD] display ospfv3 peer
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.0)
Neighbor ID
1.1.1.1
2.2.2.2
3.3.3.3
Step 3 Set the DR priority of the interface.
# Set the DR priority of Router A to 100.
[RouterA] interface GigabitEthernet 1/0/0
[RouterA-GigabitEthernet1/0/0] ospfv3 dr-priority 100
[RouterA-GigabitEthernet1/0/0] quit
# Set the DR priority of Router B to 0.
[RouterB] interface GigabitEthernet 1/0/0
[RouterB-GigabitEthernet1/0/0] ospfv3 dr-priority 0
Issue 02 (2014-09-30)
NOTE
The router with the greater router ID is the DR when routers have the same priority. If a certain Ethernet
interface of a router becomes a DR, the other broadcast interfaces of the router have the highest priority in
DR election. That is, the DR router is elected as the DR.
Pri
State
1
2-Way/DROther
1
Full/Backup
1
Full/DR
Pri
State
1
Full/DROther
1
Full/DROther
1
Full/Backup
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Dead Time
Interface
00:00:32
GE1/0/0
00:00:36
GE1/0/0
00:00:38
GE1/0/0
Dead Time
Interface
00:00:32
GE1/0/0
00:00:35
GE1/0/0
00:00:30
GE1/0/0
6 OSPFv3 Configuration
Instance ID
0
0
0
Instance ID
0
0
0
472

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e