Suppressing An Interface From Sending And Receiving Ospfv3 Packets - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Context
Setting the millisecond-level interval for generating the same LSA speeds up network
convergence. When a network becomes unstable, reduce the interval for generating the same
LSA by using an intelligent timer.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 [ process-id ]
The OSPFv3 view is displayed.
Step 3 Run:
lsa-originate-interval intelligent-timer max-interval start-interval
The interval for generating the same LSA is set.
l max-interval specifies the maximum interval for updating LSAs.
l start-interval specifies the initial interval for updating LSAs.
l hold-interval specifies the hold interval for updating LSAs.
----End
6.8.5 Suppressing an Interface from Sending and Receiving OSPFv3
Packets
By suppressing the OSPFv3 interface from receiving and sending OSPFv3 packets, you can
prevent routers on a certain network from obtaining OSPFv3 routing information and prevent
the local router from receiving routing information from other routers.
Context
To prevent a router from advertising routes to the router on a certain network and from importing
the routes of other routers, you can suppress the interface on which OSPFv3 is enabled from
receiving and sending OSPFv3 packets.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 [ process-id ]
The OSPFv3 view is displayed.
Issue 02 (2014-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
hold-interval
437