Before You Start - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing

6.6.1 Before You Start

Before configuring OSPFv3 route attributes, familiarize yourself with the usage scenario,
complete pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
In actual applications, to meet the requirements of a complicated networking environment, you
can change OSPFv3 routing policies by configuring OSPFv3 route attributes. Through the
following procedures, you can:
l
l
Pre-configuration Tasks
Before configuring OSPFv3 route attributes, complete the following tasks:
l
l
Data Preparation
To configure OSPFv3 route attributes, you need the following data.
No.

1

2
6.6.2 Setting the Cost of the OSPFv3 Interface
OSPFv3 can automatically calculate the link cost for an interface according to the interface
bandwidth. You can also set the link cost for the interface by using the related command.
Context
You can control route calculation by setting the link cost of OSPFv3 on different interfaces.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
Issue 02 (2014-09-30)
Set the cost on the OSPFv3 interface.
Configure load balancing among equal-cost routes.
Enabling IPv6 capability
Configuring Basic OSPFv3 Functions
Data
Link cost
Maximum number of equal-cost routes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
419