Example For Configuring Local Mt - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l

7.24.8 Example for Configuring Local MT

This part provides an example for configuring multicast packets to be forwarded through TE
tunnels on IS-IS networks.
Networking Requirements
As shown in
l
l
l
Issue 02 (2014-09-30)
ipv6 enable
ipv6 address 2008::1/64
isis ipv6 enable 1
#
return
Configuration file of Router D
#
sysname RouterD
#
ipv6 topology blue
#
isis 1
is-level level-1
cost-style wide
network-entity 86.0000.0000.0004.00
ipv6 enable topology ipv6
#
ipv6 topology blue topology-id 20
#
interface GigabitEthernet1/0/0
undo shutdown
ipv6 enable
ipv6 address 2001:db8:1::2/64
isis ipv6 enable 1
isis cost 6
isis ipv6 cost 6
ipv6 topology blue enable
isis ipv6 topology blue
#
interface GigabitEthernet2/0/0
undo shutdown
ipv6 enable
ipv6 address 2001:db8:2::1/64
isis ipv6 enable 1
isis cost 14
isis ipv6 cost 14
ipv6 topology blue enable
isis ipv6 topology blue
#
return
Figure 7-11:
Router A, Router B, Router C, Router D, and Router E run IS-IS, and they are Level-2
routers.
A TE tunnel is established between Router B and Router D.
IGP Shortcut is enabled on Router B.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 IS-IS Configuration
675