Huawei Quidway NetEngine80E Configuration Manual page 946

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
In Figure
are IBGP peers.
Figure 8-17 Networking
Router A
The configurations on Router C are as follows:
#
bgp 65001
#
ipv4-family unicast
network 10.1.2.0 255.255.255.252
10.1.2.0/30.
network 10.1.3.0 255.255.255.252
10.1.3.0/30.
import-route direct
#
The configurations on Router D are as follows:
#
bgp 65001
#
ipv4-family unicast
network 10.1.3.0 255.255.255.252
10.1.3.0/30.
network 10.1.4.0 255.255.255.252
10.1.4.0/30.
import-route direct
#
Run the display bgp routing-table [ ip-address ] command to check the configurations.
# Display the routing table of Router D.
[RouterD] display bgp routing-table
BGP Local router ID is 10.1.3.2
Status codes: * - valid, > - best, d - damped,
Total Number of Routes: 10
Issue 02 (2014-09-30)
8-17, Router A and Router B are EBGP peers, and Router B, Router C, and Router D
AS 100
10.1.1.1/30
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Router B
10.1.3.1/30
10.1.1.2/30
10.1.2.1/30
IBGP
10.1.2.2/30
//Advertise the route
//Advertise the route
//Import direct routes.
//Advertise the route
//Advertise the route
//Import direct routes.
MED LocPrf
8 BGP Configuration
AS 65001
Router D
IBGP
10.1.3.2/30
10.1.4.1/30
IBGP
Router C
10.1.4.2/30
PrefVal Path/Ogn
921