Huawei Quidway NetEngine80E Configuration Manual page 732

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Label_NextToken : 0
LspBfdState
The command output shows that traffic from P1 to P3 has been switched to the backup link with
the outbound interface being Tunnel 1/0/0.
----End
Configuration Files
l
Issue 02 (2014-09-30)
: 0
Configuration file of P1
#
sysname P1
#
router id 1.1.1.1
#
mpls lsr-id 1.1.1.1
mpls
mpls te
mpls rsvp-te
mpls te cspf
#
explicit-path to_p3
next hop 10.1.1.2
next hop 10.1.4.2
next hop 10.1.6.1
next hop 3.3.3.3
#
mpls ldp
#
mpls ldp remote-peer to_p3
remote-ip 3.3.3.3
undo remote-ip pwe3
#
isis 64
frr
loop-free-alternate level-2
is-level level-2
cost-style wide
network-entity 86.0010.0010.0100.1001.00
is-name P1
#
interface LoopBack0
ip address 1.1.1.1 255.255.255.255
isis enable 64
#
interface Tunnel1/0/0
description toP3
ip address unnumbered interface LoopBack0
tunnel-protocol mpls te
destination 3.3.3.3
mpls te tunnel-id 100
mpls te bandwidth ct0 200000
mpls te path explicit-path to_p3
mpls te igp advertise
mpls te igp metric absolute 6
mpls te commit
isis enable 64
#
interface GigabitEthernet1/0/0
undo shutdown
ip address 10.1.1.1 255.255.255.252
isis enable 64
isis cost 5
mpls
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Label : 0
7 IS-IS Configuration
707