Huawei Quidway NetEngine80E Configuration Manual page 281

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
# Check the RIPng routing table of Router B. The command output shows that the RIPng routing
table does not contain the route from network segment 2001:DB8:3::/64.
[RouterB] display ripng 1 route
----------------------------------------------------------------
Peer FE80::F54C:0:9FDB:1
Dest 2001:DB8:2::/64,
Peer FE80::D472:0:3C23:1
Dest 2001:DB8:1::/64,
[RouterA] display ripng 1 route
----------------------------------------------------------------
Peer FE80::476:0:3624:1
Dest 2001:DB8:2::/64,
----End
Configuration Files
l
l
Issue 02 (2014-09-30)
Route Flags: A - Aging, G - Garbage-collect
via FE80::F54C:0:9FDB:1, cost
via FE80::D472:0:3C23:1, cost
Route Flags: A - Aging, G - Garbage-collect
via FE80::476:0:3624:1, cost
Configuration file of Router A
#
sysname RouterA
#
ipv6
#
interface GigabitEthernet2/0/0
undo shutdown
ipv6 enable
ipv6 address 2001:DB8:1::1/64
ripng 1 enable
#
interface Pos1/0/0
link-protocol ppp
undo shutdown
ipv6 enable
ipv6 address auto link-local
ripng 1 enable
#
ripng 1
#
return
Configuration file of Router B
#
sysname RouterB
#
ipv6
#
acl ipv6 number 2000
rule 0 deny source 2001:DB8:3::/64
rule 1 permit
#
interface Pos1/0/0
link-protocol ppp
undo shutdown
ipv6 enable
ipv6 address auto link-local
ripng 1 enable
#
interface Pos2/0/0
link-protocol ppp
undo shutdown
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
on Pos2/0/0
1, tag 0, A, 14 Sec
on Pos1/0/0
1, tag 0, A, 25 Sec
on Pos1/0/0
2, tag 0, A, 7 Sec
4 RIPng Configuration
256