Configuring Basic Ipv6 Is-Is Functions - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
PROTECT:LINK-NODE
0000.0000.0004.00
PROTECT:LINK-NODE

7.12 Configuring Basic IPv6 IS-IS Functions

This section describes the procedures for configuring basic IPv6 IS-IS functions, including the
procedures for configuring IS-IS processes and interfaces, to implement communication
between nodes on an IPv6 IS-IS network.
7.12.1 Before You Start
Before configuring basic IPv6 IS-IS functions, familiarize yourself with the usage scenario,
complete the pre-configuration tasks, and obtain the required data.
Applicable Environment
To deploy IS-IS on an IPv6 network, configure basic IS-IS functions to implement
communication between different nodes on the network.
Other IS-IS functions can be configured only after basic IS-IS functions are configured.
Configuring basic IPv6 IS-IS functions includes the following operations:
1.
2.
Issue 02 (2014-09-30)
(B) 2.0.0.2
IPv4 Nexthops-MIGP : 0
IPv6 Nexthops : 0
Neighbors: 2 (Children:1 Parents:1 Others:0)
(1) 0000.0000.0003.02
Cost
Flags : Parent
(2) 0000.0000.0004.03
Cost
Flags : Child
ISIS(1) Level-2 Shortest Path Tree
----------------------------------
Distance : 20
Distance-URT : 20
Flags : SPT/V6_Islt
IPv4 Nexthops-URT : 1
(1) 1.0.0.2
(B) 2.0.0.2
IPv4 Nexthops-MIGP : 0
IPv6 Nexthops : 0
Neighbors: 2 (Children:1 Parents:1 Others:0)
(1) 0000.0000.0003.02
Cost
Flags : Parent
(2) 0000.0000.0004.03
Cost
Flags : Child
Create IPv6 IS-IS processes.
Configure IPv6 IS-IS interfaces.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IF:GE2/0/0 NBR:0000.0000.0002.00 TYPE:LOOP-FREE
: 10
: 10
IF:GE1/0/0 NBR:0000.0000.0003.00
IF:GE2/0/0 NBR:0000.0000.0002.00 TYPE:LOOP-FREE
: 10
: 10
7 IS-IS Configuration
571