Enabling Ipsec On An Interface - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Step 4 Run:
ipsec sa sa-name
An SA is configured in the OSPFv3 area.
----End

6.12.4 Enabling IPSec on an Interface

An SA configured on an interface is used to authenticate the packets sent and received by the
interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
ospfv3 ipsec sa sa-name
An SA is configured on the interface.
----End
6.12.5 Enabling IPSec on the Virtual Link
An SA configured on the Virtual Link is used to authenticate the packets sent and received on
the Virtual Link.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 [ process-id ]
The OSPFv3 view is displayed.
Step 3 Run:
Issue 02 (2014-09-30)
NOTE
The SA configured on an OSPFv3 area takes precedence over that configured in an OSPFv3 process.
NOTE
The SA configured on an OSPFv3 interface takes precedence over that configured in an OSPFv3 process
and an OSPFv3 area.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
455