Huawei Quidway NetEngine80E Configuration Manual page 919

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Item
PrefVal
Path/Ogn
Information about Next_Hop, MED, Local_Pref, PrefVal, AS_Path, and Origin can be displayed
using the display bgp routing-table command. To check information about the route type,
AIGP, peer type, IGP cost, Cluster_List, router ID, and peer IP address, run the display bgp
routing-table network command.
<HUAWEI> display bgp routing-table 10.1.1.1
BGP local router ID : 192.168.2.2
Local AS number : 65001
Paths:
BGP routing table entry information of 10.1.1.1/32:
From: 10.1.3.1 (192.168.2.3)
Route Duration: 05h35m04s
Relay IP Nexthop: 0.0.0.0
Relay IP Out-Interface: GigabitEthernet1/0/4
Original nexthop: 10.1.3.1
Qos information : 0x0
AS-path Nil, origin incomplete, MED 1234, localpref 100, pref-val 0, valid,
internal, best, select, active, pre 255, IGP cost 1, AIGP 1
Not advertised to any peer yet
Table 8-13 Description of the display bgp routing-table command output
Item
BGP local router
ID
Local AS number
Paths
BGP routing table
entry information
of 10.1.1.1/32
From
Route Duration
Relay IP Nexthop
Relay IP Out-
Interface
Original nexthop
Issue 02 (2014-09-30)
Description
PrefVal
AS_Path and Origin attributes
1 available, 1 best, 1 select
Description
Router ID of the local device, in the same format as an IPv4 address.
Local AS number.
BGP route information.
Information about the BGP route 10.1.1.1/32:
IP address of the device that advertised the route. In this example,
10.1.3.1 is the IP address of the interface used by the peer to establish
the BGP peer relationship (peer IP address), and 192.168.2.3 is the
router ID of the peer.
Duration of a route.
IP address of the route to which the BGP route is iterated.
Outbound interface of the route to which the BGP route is iterated.
Original next hop IP address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 BGP Configuration
894