Huawei Quidway NetEngine80E Configuration Manual page 709

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
[RouterA-Pos1/0/0] ipv6 enable
[RouterA-Pos1/0/0] ipv6 address 2001:db8:1::2/64
Step 2 Configure IS-IS.
# Configure Router A.
[RouterA] isis 1
[RouterA-isis-1] is-level level-1
[RouterA-isis-1] network-entity 10.0000.0000.0001.00
[RouterA-isis-1] ipv6 enable
[RouterA-isis-1] quit
[RouterA] interface pos 1/0/0
[RouterA-Pos1/0/0] isis ipv6 enable 1
[RouterA-Pos1/0/0] quit
# Configure Router B.
[RouterB] isis 1
[RouterB-isis-1] is-level level-1
[RouterB-isis-1] network-entity 10.0000.0000.0002.00
[RouterB-isis-1] ipv6 enable
[RouterB-isis-1] quit
[RouterB] interface pos 1/0/0
[RouterB-Pos1/0/0] isis ipv6 enable 1
[RouterB-Pos1/0/0] quit
# Configure Router C.
[RouterC] isis 1
[RouterC-isis-1] network-entity 10.0000.0000.0003.00
[RouterC-isis-1] ipv6 enable
[RouterC-isis-1] quit
[RouterC] interface pos 1/0/0
[RouterC-Pos1/0/0] isis ipv6 enable 1
[RouterC-Pos1/0/0] quit
[RouterC] interface pos 2/0/0
[RouterC-Pos2/0/0] isis ipv6 enable 1
[RouterC-Pos2/0/0] quit
[RouterC] interface pos 3/0/0
[RouterC-Pos3/0/0] isis ipv6 enable 1
[RouterC-Pos3/0/0] isis circuit-level level-2
[RouterC-Pos3/0/0] quit
# Configure Router D.
[RouterD] isis 1
[RouterD-isis-1] is-level level-2
[RouterD-isis-1] network-entity 20.0000.0000.0004.00
[RouterD-isis-1] ipv6 enable
[RouterD-isis-1] quit
[RouterD] interface pos 1/0/0
[RouterD-Pos1/0/0] isis ipv6 enable 1
[RouterD-Pos1/0/0] quit
[RouterD] interface gigabitethernet 2/0/0
[RouterD-GigabitEthernet2/0/0] isis ipv6 enable 1
[RouterD-GigabitEthernet2/0/0] quit
Step 3 Verify the configuration.
# Display the IS-IS routing table of Router A.
[RouterA] display isis route
Issue 02 (2014-09-30)
Route information for ISIS(1)
-----------------------------
ISIS(1) Level-1 Forwarding Table
--------------------------------
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 IS-IS Configuration
684