Huawei Quidway NetEngine80E Configuration Manual page 510

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
# After the preceding configurations are complete, run the display ospfv3 bfd session command
on Router A or Router B. You can view that the status of the BFD session is Up.
Take the display of Router B as an example:
<RouterB> display ospfv3 bfd session verbose
* - STALE
OSPFv3 Process (1)
Step 4 Verify the configuration.
# Run the shutdown command on GE 1/0/0 of Router B to simulate the active link failure.
[RouterB] interface gigabitethernet1/0/0
[RouterB-GigabitEthernet1/0/0] shutdown
# Display the routing table on Router A. The standby link Router A → Router C → Router B
takes effect after the active link fails. The next hop address of the route to 2001:DB8:4::1/64
becomes GigabitEthernet1/0/1.
<RouterA> display ospfv3 routing
Codes : E2 - Type 2 External, E1 - Type 1 External, IA - Inter-Area,
N - NSSA, U - Uninstalled, D - Denied by Import Policy
OSPFv3 Process (1)
Destination
Next-hop
2001:DB8:1::/64
2001:DB8:2::/64
2001:DB8:3::/64
Issue 02 (2014-09-30)
Neighbor-Id: 1.1.1.1
BFD Status: Up
Interface: GE1/0/0
IPv6-Local-Address: FE80::E0:CE19:8142:1
IPv6-Remote-Address: FE80::E0:4C3A:143:1
BFD Module preferred timer values
Transmit-Interval(ms): 100
Receive-Interval(ms): 100
Detect-Multiplier: 3
OSPFv3 Module preferred timer values
Transmit-Interval(ms): 100
Receive-Interval(ms): 100
Detect-Multiplier: 3
Configured timer values
Transmit-Interval(ms): 100
Receive-Interval(ms): 100
Detect-Multiplier: 3
Neighbor-Id: 3.3.3.3
BFD Status: Down
Interface: GE1/0/1
IPv6-Local-Address: FE80::E0:CE19:8142:2
IPv6-Remote-Address: FE80::E0:9C69:8142:1
BFD Module preferred timer values
Transmit-Interval(ms): 2200
Receive-Interval(ms): 2200
Detect-Multiplier: 0
OSPFv3 Module preferred timer values
Transmit-Interval(ms): 1000
Receive-Interval(ms): 1000
Detect-Multiplier: 3
Configured timer values
Transmit-Interval(ms): 1000
Receive-Interval(ms): 1000
Detect-Multiplier: 3
directly connected, GigabitEthernet1/0/0
via FE80::E0:9C69:8142:2, GigabitEthernet1/0/1
directly connected, GigabitEthernet1/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
Metric
1
2
1
485