Huawei Quidway NetEngine80E Configuration Manual page 467

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 process-id
The OSPFv3 view is displayed.
Step 3 Run any of the following commands as required:
l Configure a basic ACL:
l Configure an advanced ACL:
Issue 02 (2014-09-30)
1. Run:
helper-role [ [ acl-number acl-number | acl-name acl-name ] | max-grace-
period period | planned-only | lsa-checking-ignore ]
The helper of OSPFv3 GR is enabled.
2. Run:
quit
Return to the system view.
3. Run
acl ipv6 { [ number ] acl6-number1 | name acl-name [ number acl-number2 ] }
[ match-order { auto | config } ]
The basic ACL view is displayed.
4. Run
rule [ rule-id ] { deny | permit } [ fragment | source { source-ipv6-
address prefix-length | source-ipv6-address/prefix-length | any } | time-
range time-name | vpn-instance vpn-instance-name ]
A rule is configured for the basic ACL.
When the rule command is run to configure rules for a named ACL, only the source
address range specified by source and the time period specified by time-range are valid
as the rules.
1. Run:
helper-role [ acl-name acl-name | max-grace-period period | planned-only |
lsa-checking-ignore ]
The helper of OSPFv3 GR is enabled.
2. Run:
quit
Return to the system view.
3. Run
acl ipv6 name acl-name [ number acl-number2 ] [ match-order { auto |
config } ]
The basic ACL view is displayed.
4. Run
rule [ rule-id ] { deny | permit } protocol [ source { source-ipv6-address
prefix-length | source-ipv6-address/prefix-length | any } | time-range time-
*
name ]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
6 OSPFv3 Configuration
*
*
442