Huawei Quidway NetEngine80E Configuration Manual page 680

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
[RouterB-isis-1] summary 172.1.0.0 255.255.0.0 level-1-2
[RouterB-isis-1] quit
Step 5 Verify the configuration.
# Run the display isis route command to display the routing table of Router A. The command
output shows that the summary route 172.1.0.0/16 has been generated.
[RouterA] display isis route
IPV4 Destination
----------------------------------------------------------------------------
172.1.0.0/16
172.2.1.0/24
----End
Configuration Files
l
l
l
Issue 02 (2014-09-30)
ISIS(1) Level-2 Forwarding Table
--------------------------------
IntCost
20
10
Flags: D-Direct, A-Added to URT, L-Advertised in LSPs, S-IGP Shortcut,
Configuration file of Router A
#
sysname RouterA
#
isis 1
is-level level-2
network-entity 20.0000.0000.0001.00
#
interface GigabitEthernet2/0/0
ip address 172.2.1.1 255.255.255.0
isis enable 1
#
return
Configuration file of Router B
#
sysname RouterB
#
isis 1
network-entity 10.0000.0000.0002.00
summary 172.1.0.0 255.255.0.0 level-1-2
#
interface GigabitEthernet2/0/0
ip address 172.2.1.2 255.255.255.0
isis enable 1
#
interface GigabitEthernet1/0/0
ip address 172.1.4.2 255.255.255.0
isis enable 1
#
return
Configuration file of Router C
#
sysname RouterC
#
isis 1
is-level level-1
network-entity 10.0000.0000.0003.00
#
interface GigabitEthernet1/0/0
ip address 172.1.4.1 255.255.255.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Route information for ISIS(1)
-----------------------------
ExtCost ExitInterface
NULL GE2/0/0
NULL GE2/0/0
U-Up/Down Bit Set
7 IS-IS Configuration
NextHop Flags
172.2.1.2 A/-/L/-
Direct D/-/L/-
655