Download Print this page

Huawei Quidway NetEngine80E Configuration Manual page 339

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
No.
1
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospf [ process-id ]
The OSPF process view is displayed.
Step 3 Run:
area area-id
The OSPF area view is displayed.
Step 4 Run:
nssa [ { default-route-advertise | suppress-default-route } | flush-waiting-timer
interval-value | no-import-route | no-summary | set-n-bit | suppress-forwarding-
address | translator-always | translator-interval interval-value | zero-address-
forwarding | translator-strict ]
The specified area is configured as an NSSA.
The nssa command is applicable to the following scenarios:
l The parameter default-route-advertise is used to advertise Type 7 LSAs carrying the default
l When the area to which the ASBR belongs is configured as an NSSA, invalid Type 5 LSAs
Issue 02 (2014-09-30)
Data
(Optional) Cost of the default route to the NSSA
NOTE
By default, the cost of the default route to the NSSA is 1.
NOTE
l All routers in the NSSA must be configured with NSSA attributes using the nssa command.
l Configuring or deleting NSSA attributes may trigger routing update in the area. A second configuration
of NSSA attributes can be implemented or canceled only after routing update is complete.
route on the ABR or ASBR to the NSSA.
Type 7 LSAs carrying the default route will be generated regardless of whether the default
route 0.0.0.0 exists in the routing table on the ABR. On the ASBR, however, the default Type
7 LSA is generated only when the default route 0.0.0.0 exists in the routing table.
from other routers in the area where LSAs are flooded will be reserved. These LSAs will be
deleted only when the aging time reaches 3600s. The router performance is affected because
the forwarding of a large number of LSAs consumes the memory resources. To resolve such
a problem, you can set the parameter flush-waiting-timer to the maximum value 3600s for
Type 5 LSAs so that the invalid Type 5 LSAs from other routers can be deleted in time.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
5 OSPF Configuration
314

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e