Huawei Quidway NetEngine80E Configuration Manual page 414

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
[RouterA] slave switchover
<RouterB> display ospf 1 peer
Area 0.0.0.0 interface 10.1.2.2(Pos2/0/0)'s neighbors
Router ID: 10.1.1.2
Area 0.0.0.2 interface 10.1.3.2(Pos1/0/1)'s neighbors
Router ID: 10.1.3.1
<RouterC> ping 192.168.1.1
PING 192.168.1.1: 56
--- 192.168.1.1 ping statistics ---
----End
Configuration Files
l
Issue 02 (2014-09-30)
OSPF Process 1 with Router ID 10.1.2.2
Neighbors
State: Full Mode:Nbr is
DR: None BDR: None
Dead timer due in 39
Retrans timer interval: 4
Neighbor is up for 00:01:45
Authentication Sequence: [ 0 ]
Neighbors
State: Full Mode:Nbr is
DR: None BDR: None
Retrans timer interval: 4
Dead timer due in 34
Retrans timer interval: 4
Neighbor is up for 00:09:26
Authentication Sequence: [ 0 ]
Reply from 192.168.1.1: bytes=56 Sequence=1 ttl=253 time=90 ms
Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=253 time=30 ms
Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=253 time=50 ms
Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=253 time=60 ms
Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=253 time=70 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/60/90 ms
Configuration file of Router A
#
sysname RouterA
#
interface Pos1/0/0
link-protocol ppp
ip address 10.1.1.2 255.255.255.0
#
interface Pos2/0/0
link-protocol ppp
ip address 10.1.2.1 255.255.255.0
#
ospf 1
opaque-capability enable
graceful-restart
area 0.0.0.0
network 10.1.2.0 0.0.0.255
area 0.0.0.1
network 10.1.1.0 0.0.0.255
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Address: 10.1.2.1
Slave Priority: 1
MTU: 0
sec
Address: 10.1.3.1
Master Priority: 1
MTU: 0
sec
data bytes, press CTRL_C to break
5 OSPF Configuration
GR State: Normal
GR State: Normal
389