Enabling Ipsec In An Ospfv3 Process - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
No.
10
11

6.12.2 Enabling IPSec in an OSPFv3 Process

An SA configured in an OSPFv3 process is used to authenticate packets of the process.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 [ process-id ]
The OSPFv3 view is displayed.
Step 3 Run:
ipsec sa sa-name
An SA is configured in the OSPFv3 process.
An OSPFv3 process can be associated with multiple OSPFv3 areas. An SA applied in the
OSPFv3 process can be used in the associated areas.
----End
6.12.3 Enabling IPSec in an OSPFv3 Area
An SA configured in an OSPFv3 area is used to authenticate the packets of the area.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospfv3 [ process-id ]
The OSPFv3 view is displayed.
Step 3 Run:
area area-id
The OSPFv3 area view is displayed.
Issue 02 (2014-09-30)
Data
ESP authentication key (in the hexadecimal format) used for protecting incoming and
outgoing traffic
ESP encapsulation key (in the hexadecimal format) used for protecting incoming and
outgoing traffic
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
454