Download Print this page

Configuring The Next_Hop Attribute - Huawei Quidway NetEngine80E Configuration Manual

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
The BGP view is displayed.
Step 3 Run:
ipv6-family [ unicast ]
The BGP IPv6 unicast address family view is displayed.
Step 4 Run the following commands to configure the BGP4+ MED attribute as required:
l Run:
l Run:
l Run:
l Run:
l Run:
----End

9.3.6 Configuring the Next_Hop Attribute

By setting the Next_Hop attribute, you can flexibly control BGP4+ route selection.
Procedure
l
Issue 02 (2014-09-30)
default med med
The default MED attribute is configured.
compare-different-as-med
The MED values from different ASs are compared.
deterministic-med
Deterministic-MED is enabled.
If this command is not configured, when an optimal route is to be selected from among routes
which are received from different ASs and which carry the same prefix, the sequence in
which routes are received is relevant to the result of route selection. After the command is
configured, however, when an optimal route is to be selected from among routes which are
received from different ASs and which carry the same prefix, routes are first grouped
according to the leftmost AS in the AS_Path. Routes with the same leftmost AS are grouped
together, and after comparison, an optimal route is selected for the group. The group optimal
route is then compared with optimal routes from other groups to determine the final optimal
route. This mode of route selection ensures that the sequence in which routes are received is
no longer relevant to the result of route selection.
bestroute med-none-as-maximum
The maximum MED value is used when the current MED is not available.
bestroute med-confederation
The MED values of routes advertised in the local confederation are compared.
The commands in Step 4 can be used regardless of the order.
Modifying the Next Hop When Advertising a Route to an IBGP Peer
1.
Run:
system-view
The system view is displayed.
2.
Run:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 BGP4+ Configuration
1056

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e