Huawei Quidway NetEngine80E Configuration Manual page 399

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
[RouterD-ospf-1-area-0.0.0.0] mpls-te enable
[RouterD-ospf-1-area-0.0.0.0] quit
Step 5 Configure an MPLS TE tunnel and enable IGP Shortcut.
# Configure an MPLS TE tunnel and enable IGP Shortcut for it on Router B.
[RouterB] interface tunnel 1/0/0
[RouterB-Tunnel1/0/0] ip address unnumbered interface loopback 0
[RouterB-Tunnel1/0/0] tunnel-protocol mpls te
[RouterB-Tunnel1/0/0] destination 4.4.4.4
[RouterB-Tunnel1/0/0] mpls te tunnel-id 100
[RouterB-Tunnel1/0/0] mpls te commit
[RouterB-Tunnel1/0/0] mpls te igp shortcut ospf
[RouterB-Tunnel1/0/0] mpls te igp metric relative -10
[RouterB-Tunnel1/0/0] quit
# Check the OSPF routing table on Router B. Information shows that an MPLS TE tunnel has
been set up.
[RouterB] display ip routing-table
Routing Tables: Public
Destination/Mask
GigabitEthernet2/0/0
GigabitEthernet1/0/0
GigabitEthernet2/0/0
GigabitEthernet2/0/0
GigabitEthernet2/0/0
# Check the multicast routing table on Router C.
[RouterC] display multicast routing-table
No multicast routing entry is displayed in the multicast routing table on Router C, indicating
that multicast packets have been dropped.
Step 6 Configure local OSPF MT.
# Enable local OSPF MT on Router B.
[RouterB] ospf
[RouterB-ospf-1] local-mt enable
[RouterB-ospf-1] quit
Step 7 Verify the configuration.
# Check the multicast routing table on Router C.
[RouterC] display multicast routing-table
Issue 02 (2014-09-30)
Destinations : 14
Proto
2.2.2.2/32 Direct
3.3.3.3/32 OSPF
4.4.4.4/32 OSPF 10
5.5.5.5/32 OSPF 10
10.0.0.0/24 Direct
10.0.0.2/32 Direct
10.0.1.0/24 Direct
10.0.1.2/32 Direct
10.0.2.0/24 OSPF
OSPF
10.0.3.0/24 OSPF 10
127.0.0.0/8 Direct
127.0.0.1/32 Direct
172.16.1.0/24 OSPF
192.168.3.0/24 OSPF 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Routes : 14
Pre Cost Flags
0 0 D
10 1 D
1 D 2.2.2.2
2 D 2.2.2.2
0 0 D
0 0 D
0 0 D
0 0 D
10 2 D
10 2 D
2 D 2.2.2.2
0 0 D
0 0 D
10 2 D
3 D 2.2.2.2
5 OSPF Configuration
NextHop Interface
127.0.0.1 InLoopBack0
10.0.1.1
Tunnel1/0/0
Tunnel1/0/0
10.0.0.2
127.0.0.1 InLoopBack0
10.0.1.2
127.0.0.1 InLoopBack0
10.0.1.1
10.0.1.1 Tunnel1/0/0
Tunnel1/0/0
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
10.0.0.1
Tunnel1/0/0
374