Spare Parts; Terminal Blocks (2-Pin); Configuration And License Plug - Siemens SIMATIC NET SCALANCE XC-300 Operating Instructions Manual

Description of the device

4.5 Spare parts

Unpacking and checking
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the
specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
4.5 Spare parts
The following spare parts are available for the devices mentioned in the scope of validity:
4.5.1

Terminal blocks (2-pin)

Component
2-pin spring-loaded ter‐
minal block
4.5.2

Configuration and License PLUG

Component
SCALANCE CLP 2 GB
SCALANCE CLP EEC 2 GB
30
WARNING
Description
2-pin spring-loaded terminal block for connect‐
ing the 24 V DC power supply and the 24 V DC
signaling contact
pack of 5
Description
Configuration and License PLUG, remova‐
ble data storage medium for configuration
data, 2 GB
Configuration and License PLUG, remova‐
ble data storage medium for configuration
data, 2 GB
conformal-coated PCBs
Operating Instructions, 10/2022, C79000-G8976-C584-01
Article number
6GK5980-0BB10-0AA5
Article number
6GK1900-0UB00-0AA0
6GK1900-0UQ00-0AA0
SCALANCE XC-300