Setting The Display Mode; Configuration And License Plug; Position - Siemens SIMATIC NET SCALANCE XCM-300 Product Manual

Description of the device

4.8 Configuration and License PLUG

4.7.3

Setting the display mode

To set the display mode, press the button as follows:
Pressing the button
starting at display mode A
-
Press once
Press twice
Press three times
Depending on the set display mode, the "L1", "L2" LEDs and the port LEDs show different
information.
If you do not press the button for longer than 1 minute, the device automatically changes to
display mode A.
4.8 Configuration and License PLUG
The Configuration and License PLUG (CLP) is a USB storage medium for backing up and
exchanging data and licenses.
The CLP has a USB type C interface and can be used with the following devices that have a
corresponding interface:
• Siemens products
• Personal computers (PCs), such as desktop PCs, tablet PCs, laptops, or smartphones
4.8.1

Position

The CLP slot is located on the top of the device.
Figure 4-4
28
Position of the CLP slot using the example of a SCALANCE XCM332
LED status
DM1 DM2
Off
On Off
Off On
On
Product Manual, 04/2022, C79000-G8976-C585-01
Display mode
Display mode A
Display mode B
Display mode C
Display mode D
SCALANCE XCM-300