How To Playback A Session; Recording Configuration - Keysight N9912A User Manual

 Then
 Then
REC
During recording, choose from the following:




How to Playback a Session

 Press Trace 6
 If the session is already open, skip the following step. Otherwise:
 Then
 Then
 Then
PLAY
the recording is reached, playback begins again at trace 1 and continues to loop
indefinitely.
During playback, choose from the following:



Recording Configuration

To change Recording Configuration settings:
Interference Analyzer (SA Mode) - Option 236
Recorder Player
Record
is displayed in the left of screen graticules.
Temporarily halts recording until pressed again. The incoming
Pause Resume
trace continues to sweep. Press again to continue recording.
Immediately stops recording. Then choose from the following:
Stop
Press to start replaying the recording from the beginning.
Play
o
Press to continue recording.
Record
o
Press to insert a User Tag at the current recorded trace. This allows you
User Tag
to quickly move to this location during playback. Learn more in About State and
User Tags on page 108.
Record Playback Setup
Press
Recall Session
o
Recorder Player
Play
is displayed in the left of screen graticules during playback. When the end of
Temporarily halts playback. Then choose from the following:
Pause Resume
Press to continue playing.
Pause Resume
o
Playback State/Tag
o
scroll through the state tags. Enter a value between 1 and the total number of
state tags using the numeric keypad, ▲|▼ arrows, or the rotary knob. Learn
more in About State and User Tags on page 108.
Activated automatically when Paused. Allows you to continue
Playback Trace
o
playback from a specific trace, or scroll through traces manually. Enter a value
between 1 and the total number of traces using the numeric keypad, ▲|▼
arrows, or the rotary knob.
Immediately stops playback. Then choose from the following:
Stop
Start playback from trace 1.
Play
o
Resume recording from the last recorded trace.
Record
o
Record Playback Setup
o
settings or Close the session.
Then select a session to playback and press Open.
Allows you to continue playback from a state tag, or
Return to the setup menu to change Configuration
109