Table of Contents
Advertisement
4
Programming Instructions
Signal Generation – The SOURce Subsystem Measurement Operations & Settings:
84
Command:
Syntax:
Description:
Parameters:
Response:
Example:
This command does not perform a selftest. Use selfTeST command,
NOTE
*TST?, to perform a self test.
The SOURce subsystem allows you to control a laser source module, DFB
source module, tunable laser module, or a return loss module that has an
internal source.
Command:
Syntax:
Description:
Parameters:
Response:
Example:
Same functionality as [:SOURce[n]][:CHANnel[m]]:POWer:STATe.
NOTE
:SLOT[n]:TST?
:SLOT[n]:TST?
Returns the latest selftest results for a module.
none
Returns an error code and a short description of the error.
slot:tst? --> +0,"self test OK"<END>
:OUTPut[n][:CHANnel[m]][:STATe]
:OUTPut[n][:CHANnel[m]][:STATe]<wsp>OFF|ON|0|1
Switches the laser of the chosen source on or off.
0 or OFF:
switch laser off
1 or ON:
switch laser on
none
outp1 1
Keysight 81960A Compact TLS Module User's Guide
Advertisement
Table of Contents
