Home > Administration Submenu - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.3.2 Home > Administration Submenu
Open the Administration submenu from the Home menu. This submenu contains the following
options:
Hot
Configuration Page
Key
A
Host Access List
B
SNMP
C
Firmware (Base Modem)
D Firmware (Packet Processor)
E
Reboot
F FAST Options
G
Save Modem Configuration
H
Load Modem Configuration
I Restore Factory Defaults
Press a hot key to access a configuration page. See the specified appendix section for further
configuration information. Otherwise, press [ESC] to return to the Home menu.
Function
Configure Host Access List(s)
Configure SNMP parameters and traps
View Base Modem firmware information or select image load
View Packet Processor firmware information or select image
load
Reboot the CDM-625A
Set the FAST Feature Demo Mode or view currently installed
FAST options
Save up to 10 modem configurations to memory
Recall 1 of 10 modem configurations from memory
Discard any configuration changes and restore all settings
"as shipped"
9–12
Revision 0
MN-CDM625A
Sect.
9.3.2.1
9.3.2.2
9.3.2.3
9.3.2.4
9.3.2.5
9.3.2.6
9.3.2.7