CDM-625 Advanced Satellite Modem
Appendix E
E.3.2
Home > Administration Submenu
Open the Administration submenu from the Home menu. This submenu contains the following
options:
Hot
Configuration Page
Key
A
Host Access List
B
SNMP
C
Firmware (Base Modem)
D
Firmware (Packet Processor)
E
Reboot
F
FAST Codes
G
Save Modem Configuration
H
Load Modem Configuration
I
Restore Factory Defaults
Press a hot key to access a configuration page. See the specified appendix section for further
configuration information. Otherwise, press [ESC] to return to the Home menu.
Function
Configure Host Access List(s)
Configure SNMP parameters and traps
View Base Modem firmware information or select image load
View Packet Processor firmware information or select image
load
Reboot the CDM-625
Set the FAST Feature Demo Mode or view currently installed
FAST options
Save up to 10 modem configurations to memory
Recall 1 of 10 modem configurations from memory
Discard any configuration changes and restore all settings
"as shipped"
E–12
Revision 13
MN-CDM625
Sect.
E.3.2.1
E.3.2.2
E.3.2.3
E.3.2.4
E.3.2.5
E.3.2.6
E.3.2.7
Need help?
Do you have a question about the CDM-625 and is the answer not in the manual?
Questions and answers
How to replace the battery in comtech 625 modem