Status | Config Log
Use this read-only page to view a scrollable display the configuration change log.
Description
Configuration
Log
Modem Configuration
Figure 6-24. Status | Config Log Page
Select a logging level from the drop-down menu, and then click [Refresh] to begin logging or to
update the page. The selections are:
Logging Off
•
Front Panel (n/a, No Front panel)
•
Serial Remote
•
Web
•
SNMP
•
Telnet
•
NP Mailbox (n/a, No Network Processor plug in card)
•
TransecMailbox (n/a, Transec is not a plug-in card)
•
When selecting the logging level, the modem will log changes from the current level and all prior
levels. For example, selecting "Web" will enable logging for the WEB pages, and Serial Remote.
The visible display provides the selected configuration change log information:
Date / Time / Command
•
Date / Time / Response
•
Intf
•
Click [Clear Log] to clear the visible display.
Example:
Select Web
SLM-5650C / SLM-5650C-ODU Satellite Modem
Parameters
6–33
Revision 1
MN-SLM-5650C
Need help?
Do you have a question about the SLM-5650C CyberLynx and is the answer not in the manual?
Questions and answers
does the 5650C have a gui