Setup Items; Setup Items In Gp-Pro Ex - Fuji Electric MICREX-F Series Manual

4

Setup Items

Set communication settings of the Display with GP-Pro EX or in offline mode of the Display.
The setting of each parameter must be identical to that of External Device.
"3 Example of Communication Setting" (page 8)
4.1

Setup Items in GP-Pro EX

Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
Timeout
Retry
GP-Pro EX Device/PLC Connection Manual
Select the SIO type to communicate with the External Device.
Select speed between the External Device and the Display.
Select data length.
Select how to check parity.
Select stop bit length.
Select the communication control method to prevent overflow of transmission and
reception data.
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Setup Description
24
MICREX-F Series SIO Driver
Continues to the next page.