Show Cdp Entry - Cisco Small Business 300 1.1 Series Administration Manual

CDP Commands
78-20269-01 Command Line Interface Reference Guide
Sending Appliance TLV is enabled
Device ID format is Serial Number
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds

45.17 show cdp entry

The show cdp entry Privileged EXEC mode command displays information about
specific neighbor. Display can be limited to protocol or version information
Syntax
device-name}
show cdp entry {* |
Parameters
*—Specifies all neighbors
device-name—Specifies the name of the neighbor.
protocol—Limits the display to information about the protocols enabled on
neighbors.
version—Limits the display to information about the version of software running on
the neighbors.
Default Configuration
Version
Command Mode
Privileged EXEC mode
Example
Example 1 - .
switch#show cdp entry device.cisco.com
Device ID: device.cisco.com
Advertisement version: 2
Entry address(es):
[protocol | version]
45
693