Table of Contents
Advertisement
Management ACL Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
name—Specifies the name of a management access list to be displayed. (Length:
1–32 characters)
Default Configuration
All management ACLs are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the mlist management ACL.
Console#
show management access-list
console-only
------------
deny
! (Note: all other access implicitly denied)
mlist
-----
permit gi1
permit gi9
! (Note: all other access implicitly denied)
console#
9.6
show management access-class
The show management access-class Privileged EXEC mode command displays
information about the active management access list (ACLs).
Syntax
show management access-class
mlist
9
143
Advertisement
Table of Contents
