Table of Contents
Advertisement
IPv6 Addressing Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
1500 bytes
Command Mode
Privileged EXEC mode
User Guidelines
This command is intended for debugging and testing purposes and should be
used only by technical support personnel.
Example
console# ipv6 set mtu
36.15 show ipv6 neighbors
Use the show ipv6 neighbors Privileged EXEC mode command to display IPv6
neighbor discovery cache information.
Syntax
show ipv6 neighbors
mac-address] [interface-id]
Parameters
•
static—Shows static neighbor discovery cash entries.
•
dynamic—Shows dynamic neighbor discovery cash entries.
•
ipv6-address—Shows the neighbor discovery cache information entry of a
specific IPv6 address.
•
mac-address—Shows the neighbor discovery cache information entry of a
specific MAC address.
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, Port-channel or VLAN.
Command Mode
Privileged EXEC mode
gi1
default
{static | dynamic}[ipv6-address ipv6-address] [mac-address
36
513
Advertisement
Table of Contents
