Cisco Small Business 300 1.1 Series Administration Manual page 673

Link Layer Discovery Protocol (LLDP) Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
interface-id—Specifies a port ID.
detail—Displays detailed information about a neighbor (or neighbors) from the
main cache.
secondary—Displays information about neighbors from the secondary cache.
Default Configuration
If no port ID is entered, the command displays information for all ports.
Detail is the default parameter.
Command Mode
Privileged EXEC mode
User Guidelines
A TLV value that cannot be displayed as an ASCII string is displayed as an
hexadecimal string.
Examples
Example 1 - The following example displays information about neighboring
devices discovered using LLDP on all ports.
Location information, if it exists, is also displayed.
Switch# show lldp neighbors
Port Device ID
--- ------------------
gi1 00:00:00:11:11:11
gi1 00:00:00:11:11:11 D
gi2 00:00:26:08:13:24
gi3 00:00:26:08:13:24
Port ID System Name
-------- ----------
gi1 ts-7800-2
gi1 ts-7800-2
gi3 ts-7900-1
gi2 ts-7900-2
Capabilities TTL
------------ ----
B 90
B 90
B, R 90
W 90
44
675