Table of Contents
Advertisement
Remote Network Monitoring (RMON) Commands
78-20269-01 Command Line Interface Reference Guide
generated. If the first sample (after this entry becomes valid) is less than
or equal to fthreshold, a single falling alarm is generated.
-
falling —Specifies that if the first sample (after this entry becomes valid)
is less than or equal to fthreshold, a single falling alarm is generated.
•
name
owner
—Specifies the name of the person who configured this alarm.
(Valid string)
Default Configuration
The default method type is absolute.
The default startup direction is rising-falling.
If the owner name is not specified, it defaults to an empty string.
Command Mode
Global Configuration mode
Example
The following example configures an alarm with index 1000, MIB object ID D-Link,
sampling interval 360000 seconds (100 hours), rising threshold value 1000000,
falling threshold value 1000000, rising threshold event index 10, falling threshold
event index 10, absolute method type and rising-falling alarm.
console(config)# rmon alarm 1000 1.3.6.1.2.1.2.2.1.10.1 360000 1000000 1000000 10
20
19.6
show rmon alarm-table
Use the show rmon alarm-table EXEC mode command to display a summary of
the alarms table.
Syntax
show rmon alarm-table
Command Mode
EXEC mode
19
241
Advertisement
Table of Contents
