Cisco Small Business 300 1.1 Series Administration Manual page 78

System Management Commands
78-20269-01 Command Line Interface Reference Guide
^^ H sends telnet EC
^^ O sends telnet AO
^^ T sends telnet AYT
^^ U sends telnet EL
?/help suspends the session (return to system command prompt)
Several concurrent Telnet sessions can be opened, enabling switching between
the sessions. To open a subsequent session, the current connection has to be
suspended by pressing the escape sequence keys (Ctrl-shift-6) and x to return to
the system command prompt. Then open a new connection with the telnet EXEC
mode command.
This command lists concurrent Telnet connections to remote hosts that were
opened by the current Telnet session to the local device. It does not list Telnet
connections to remote hosts that were opened by other Telnet sessions.
Keywords Table
Options Description
/echo Enables local echo.
/quiet Prevents onscreen display of all messages from
the software.
/source-interfac Specifies the source interface.
e
/stream Turns on stream processing, which enables a raw
TCP stream with no Telnet control sequences. A
stream connection does not process Telnet
options and can be appropriate for connections
to ports running UNIX-to-UNIX Copy Program
(UUCP) and other non-Telnet protocols.
Ctrl-shift-6 x Returns to the System Command Prompt.
Ports Table
Keyword Description
BGP Border Gateway Protocol
chargen Character generator
Port Number
179
19
5
79