Show Parser Macro - Cisco Small Business 300 1.1 Series Administration Manual

Macro Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
The command has no default setting.
Command Mode
Global Configuration mode
User Guidelines
When multiple global macros are applied to a switch, the global description text is
a concatenation of texts from a number of previously applied macros.
You can verify your settings by entering the show parser macro description
privileged EXEC mode command.
Examples
Switch(conf)# macro global description "set console timeout interval"
3.6

show parser macro

Use the show parser macro User EXEC mode command to display the parameters
for all configured macros or for one macro on the switch.
Syntax
show parser macro [
macro-name}
]
Parameters
•
—
brief Display the name of all macros.
•
description [interface
interfaces or if an interface is specified, display the macro descriptions for
that interface.
•
macro-name—
name
the macro name.
Command Mode
User EXEC mode
{brief | description [interface interface-id] | name
interface-id —
]
Display information about a single macro identified by
Display the macro descriptions for all
3
59