Show Bridge Multicast Address-Table - Cisco Small Business 300 1.1 Series Administration Manual

Address Table Commands
78-20269-01 Command Line Interface Reference Guide
Example
The following example displays the multicast bridging mode for all VLANs.
Console# show bridge multicast mode
VLAN IPv4 Multicast mode
Admin
---
----------
1
MAC-GROUP
11
IPv4-GROUP
12
IPv4-SRC-
GROUP

27.26 show bridge multicast address-table

Use the show bridge multicast address-table EXEC mode command to display
multicast MAC address or IP address table information.
Syntax
show bridge multicast address-table
{mac-multicast-address | ipv4-multicast-address | ipv6-multicast-address}] [format
{ip | mac}] [source {ipv4-source-address | ipv6-source-address}
Parameters
•
vlan-id—Specifies the VLAN ID.
•
address {mac-multicast-address | ipv4-multicast-address |
ipv6-multicast-address}—Specifies the multicast address. The possible
values are:
-
mac-multicast-address—Specifies the MAC multicast address.
-
ipv4-multicast-address—Specifies the IPv4 multicast address.
-
ipv6-multicast-address—Specifies the IPv6 multicast address.
•
format {ip | mac}—Specifies the multicast address format. The possible
values are:
-
ip—Specifies that the multicast address is an IP address.
Admin
Oper
----------- -----------
MAC-GROUP
MAC-GROUP
IPv4-GROUP
IPv6-GROUP
IPv4-SRC-
IPv6-SRC-
GROUP
GROUP
[vlan vlan-id] [address
IPv6 Multicast mode
Oper
----------
-MAC-GROUP
IPv6-GROUP
IPv6-SRC-
GROUP
]
27
351