Show Interfaces Protected-Ports - Cisco Small Business 300 1.1 Series Administration Manual

Virtual Local Area Network (VLAN) Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
switchport protected-port
no switchport protected-port
Parameters
N/A
Default Configuration
Unprotected
Command Mode
Interface configuration (Ethernet, port-channel)
User Guidelines
Note that packets are subject to all filtering rules and Filtering Database (FDB)
decisions.
Example
console(config)# interface
console(config-if)# switchport protected-port

30.10 show interfaces protected-ports

Use the show interfaces protected-ports EXEC mode command to display
protected ports configuration.
Syntax
show interfaces protected-ports [
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Default Configuration
Show all protected ports.
gi
1
interface-id
]
30
411