Ip Igmp Snooping Vlan Mrouter Interface - Cisco Small Business 300 1.1 Series Administration Manual

Internet Group Management Protocol (IGMP) Snooping Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
User Guidelines
Multicast router ports are learned according to:
•
Queries received on the port
•
PIM/PIMv2 received on the port
•
DVMRP received on the port
•
MRDISC received on the port
•
MOSPF received on the port
You can execute the command before the VLAN is created.
Example
console(config)# ip igmp snooping vlan 1 mrouter learn pim-dvmrp
31.4

ip igmp snooping vlan mrouter interface

Use the ip igmp snooping mrouter interface Global Configuration mode command
to define a port that is connected to a Multicast router port. Use the no form of this
command to remove the configuration.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
•
vlan vlan-id —Specifies the VLAN.
•
interface-list
interface
be one of the following types: Ethernet port or Port-channel.
Default Configuration
No ports defined
vlan-id mrouter interface i
vlan-id mrouter interface
—Specifies the list of interfaces. The interfaces can
nterface-list
interface-list
31
437