Show Cdp Forward - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show cdp forward

To display the CDP forwarding table, use the show cdp forward user EXEC command.
Note This command is not supported on switches running the LAN base feature set.
Syntax Description entry
forward
interface interface-id
neighbor
traffic
begin
exclude
include
expression
Command Modes Use EXEC
Command History Release
12.2(53)SE2
Usage Guidelines The show cdp forward command output shows the number of CDP packets forwarded on each
ingress-port- to-egress-port mapping and the statistics for forwarded and dropped packets.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
Switch# show cdp forward
Ingress
Port
-------------------------------------------------------------
Gi2/0/2
Related Commands Command
cdp forward
OL-21522-02
show cdp forward [entry | forward | interface interface-id | neighbor | traffic] [ | {begin | exclude
| include} expression]
(Optional) Displays information about a specific neighbor entry.
(Optional) Displays the CDP forwarding information.
(Optional) Displays the CDP interface status and configuration.
(Optional) Displays the CDP neighbor entries.
(Optional) Displays the CDP statistics.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
(Optional) Expression in the output to use as a reference point.
Modification
This command was introduced.
Egress
Port
Gi2/0/13
# packets # packets
forwarded dropped
0 0
Description
Configures the ingress and egress switch ports for CDP
traffic.
Catalyst 3750-X and 3560-X Switch Command Reference
show cdp forward
2-525