Ip Igmp Last-Member-Query-Count - Cisco Small Business 300 1.1 Series Administration Manual

Internet Group Management Protocol (IGMP) Snooping Commands
78-20269-01 Command Line Interface Reference Guide
Example
console(config)# interface vlan 1
console(config-if)# ip igmp query-max-response-time 20

31.13 ip igmp last-member-query-count

Use the ip igmp last-member-query-count Interface Configuration (VLAN) mode
command to configure the Last Member Query Counter on a VLAN. Use the no
format of the command to return to default.
Syntax
ip igmp last-member-query-count
no ip igmp last-member-query-count
Parameter
count—The number of times that group- or group-source-specific queries are sent
upon receipt of a message indicating a leave. (Range: 1–7)
Default Configuration
A value of Robustness variable
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
console(config)# interface vlan 1
console(config-if)# ip igmp last-member-query-count 7
count
31
445